Call Toll Free (855) 855-1976

or email info@air-purifiers-usa.com

Cleaning Instructions 

Ozone Plates

Ozone plates should be cleaned every 1 - 3 months, more often if used in a smoking household or environment. Even with diligent cleaning and maintenance these plate(s) wear out between 1 - 7 years depending on use and maintenance, etc.

Carefully remove the ozone plate from the card cage by grasping the middle of the edge nearest to you and slowly pull it straight out. Clean the plate with hot water and ammonia in a 50/50 solution. You may use a toothbrush if needed, scrubbing gently to avoid fractures. Rinse with hot water and allow to dry completely. A hair dryer may be used if needed.  MAKE SURE PLATES ARE DRY BEFORE REINSTALLING INTO UNIT.  Reinstall plate gently, making sure that the electrical tabs are in contact with the plate. Turn on unit to ensure proper placement. If the unit begins to produce ozone, you have cleaned and installed the plates properly.

Plate Card Cage

Before installing new or cleaned plates, be sure to clean the white stand-off's at the corners of the plate card cage. The easiest way to do this is with a cotton swab and alcohol. Once this area is clean, insert new or cleaned plates into the slot as before. 

Please call customer service if you have any questions: (855) 855-1976